Avaya Configuring IP, ARP, RIP, and OSPF Services Uživatelský manuál Strana 201

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 362
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 200
Customizing OSPF Services
117356-E Rev 00
6-31
You can use the BCC or Site Manager to specify a dead interval.
Using the BCC
To set a dead interval, navigate to an OSPF interface prompt (for example,
box;
eth 2/2; ip/2.2.2.2/255.255.0.0; ospf
) and enter:
dead-interval <
interval>
interval
is the dead interval expressed in seconds.
For example, the following command causes OSPF to wait 60 seconds on IP
interface 2.2.2.2 for a Hello message before declaring the neighbor down:
ospf/2.2.2.2# dead-interval 60
ospf/2.2.2.2#
Using Site Manager
To specify a dead interval, complete the following tasks:
Note:
This value must be the same for all routers attached to the same
network.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
OSPF/MOSPF
. The OSPF/MOSPF menu opens.
4. Choose
Interfaces
. The OSPF Interfaces window opens.
5. Click on the OSPF interface that you want
to edit.
The parameter values for that interface
appear in the OSPF Interfaces window.
6. Set the
Dead Interval
parameter. Click on
Help
or see the parameter description on
page A-44
.
7. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Zobrazit stránku 200
1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 361 362

Komentáře k této Příručce

Žádné komentáře