
Configuring IP, ARP, RIP, and OSPF Services
6-60
117356-E Rev 00
Specifying Matching Criteria for an OSPF Accept Policy
You can use the BCC or Site Manager to specify matching criteria for the policy.
Using the BCC
To specify matching criteria for an accept policy, navigate to the policy prompt
(for example,
box; ip; ospf; accept/pol_1
) and enter:
match
A match prompt appears for the policy.
To specify matching criteria, enter:
<match_criterion> <value>
match_criterion value
is one of the pairs listed in Table 6-10.
Table 6-10. OSPF Accept Policy Match Criteria
Parameter Values Function
ase-type any (default)
type1
type2
Describes which type of OSPF ASE route
matches this policy
ase-tag*
* The BCC implements this matching criterion as an object. To specify multiple elements, create
multiple objects.
List of tag values Specifies OSPF tag values that could be
present in an OSPF ASE advertisement. This
policy applies to OSPF ASE advertisements
that contain the tag values in this list.
network* List of IP
addresses
Specifies the networks that match this policy.
Each specification consists of a network IP
address, a mask, and a flag to indicate
whether the network address refers to a
specific network or to a range of networks.
Enter a specific encoding of 0.0.0.0/0.0.0.0 to
match the default route. Enter a range
encoding of 0.0.0.0/0.0.0.0 to match any
route. Use the default empty list to match any
route.
Komentáře k této Příručce