Avaya Configuring IP, ARP, RIP, and OSPF Services Uživatelský manuál Strana 203

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 362
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 202
Customizing OSPF Services
117356-E Rev 00
6-33
Specifying the Metric Cost
For OSPF, the best path is the one that offers the least-cost metric.
You must configure cost metrics if you want to specify a preferred path. Allow the
preferred path to retain the default cost metric value of 1, and then assign
higher-cost metric values to the less-preferred paths.
Figure 6-4
illustrates the benefit of using configurable cost metrics. Assigning the
56 Kb line a cost metric value of 10 forces OSPF to choose the faster T1 line path
as the best path, despite the extra hop, when transmitting a packet from host A to
host B.
Figure 6-4. Example of Using Configurable Cost Metrics
Router 1
Router 2
Router 3
56 Kb
Assigned cost
metric = 10
T1
1.544 Mb
Assigned cost
metric = 1
T1
1.544 Mb
Assigned cost
metric = 1
Host
B
Host
A
IP0018A
Zobrazit stránku 202
1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 361 362

Komentáře k této Příručce

Žádné komentáře