
Reading the Event Log
308656-14.00 Rev 00
A-25
# 24: mm/dd/yy 13:09:16.178 DEBUG SLOT 2 SWSERV Code: 44
SW Sent you are cc 2 message to line 1
The line is given a valid circuit number (2) in order to be
activated
# 25: mm/dd/yy 13:09:16.193 INFO SLOT 2 SWSERV Code: 7
Dial on demand circuit being established on line 1.
The router forwards a call request number (CRN) to the V.25bis modem. It uses
the phone number configured in the Outgoing field of the circuit definition.
# 26: mm/dd/yy 13:09:16.225 TRACE SLOT 2 MODEMIF Code: 35
Connector COM1: Sent CRN cmd to T3053
In this example, the cable connection to the modem is loose. The router fails to
receive a response from the modem indicating that it received the CRN. The router
exceeds its inactivity timeout threshold, and drops DTR to terminate the
connection to the modem.
# 27: mm/dd/yy 13:10:17.446 DEBUG SLOT 2 SWSERV Code: 46
Connector COM1: FSM State: V25BIS_WAIT_FOR_ADAP_RSP(3)
Connector COM1: FSM Event: V25BIS_EVENT_TO(0); isdn flags: 0x4009
isdn_fsm_TO_WAIT - calling drop_dtr
# 28: mm/dd/yy 13:10:18.518 TRACE SLOT 2 MODEMIF Code: 27
Connector COM1: Connection timeout, retry in progress
# 29: mm/dd/yy 13:10:18.518 DEBUG SLOT 2 SWSERV Code: 46
Before g_delay for retry timer in - isdn_fsm_CONN_DELAY_IND
The router reinitializes the link with the modem after detecting that CTS is high.
# 30: mm/dd/yy 13:10:18.784 TRACE SLOT 2 MODEMIF Code: 53
Connector COM1: CTS has come up.
# 31: mm/dd/yy 13:10:18.784 DEBUG SLOT 2 MODEMIF Code: 9
Connector COM1: modem present V.25bis mode
Once again, the router sends the CRN to the modem.
# 32: mm/dd/yy 13:10:18.784 TRACE SLOT 2 MODEMIF Code: 35
Connector COM1: Sent CRN cmd to T3053
# 65: mm/dd/yy 13:12:58.985 TRACE SLOT 2 MODEMIF Code 35
Connector COM1: Sent CRN cmd to T3053
# 66: mm/dd/yy 13:12:59.032 DEBUG SLOT 2 SWSERV Code: 46
Connector COM1: FSM State: V25BIS_WAIT_FOR_ADAP_RSP(3)
Connector COM1: FSM Event: V25BIS_EVENT_VALID_RSP(8); isdn flags:
0x4009
The messages assume that you reconnected the cable to the modem.
Komentáře k této Příručce