Avaya Troubleshooting Routers Průvodce řešením problémů stáhnout pdf (Strana 221)

Using the Technician Interface to Configure and Run Packet Capture

308656-14.00 Rev 00

B-27

<value>

is one of the following:

• 1 -- Packet Capture will copy a packet if it matches either Filter 1 or Filter 2.

• 2 -- Packet Capture will copy a packet only if it matches both Filter 1 and

Filter 2.

Configuration Examples

This section shows examples of Packet Capture configurations. The circuit is on a

CSMA/CD interface. The line number is 102101.

Example 1

This example sets the following configuration:

• 1024 bytes of memory reserved for Packet Capture

• 64 bytes of each packet to be saved

• Incoming and outgoing packets to be saved

• No filters and no triggers

The instructions are as follows:

Reserve 1024 bytes of memory:

set wfPktCaptureEntry.8.102101 1

represents the wfPktCaptureBufSize attribute.

Save 64 bytes of each packet:

set wfPktCaptureEntry.9.102101 2

represents the wfPktCapturePktSize attribute.

Save incoming and outgoing packets:

set wfPktCaptureEntry.10.102101 3;commit

represents the wfPktCaptureDirection attribute.

Note:

Packet Capture uses this parameter only if you configure both capture

filters associated with a single direction.

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 267 268

Žádné komentáře

Avaya Troubleshooting Routers Průvodce řešením problémů Strana 221