
Accessing the Interior
109352-E Rev. A 4-7
Remove the EMC shield (Figure 4-5) as follows:
1. Remove the front bezel. (Refer to “Removing and Replacing the Front
Bezel” earlier in this chapter for instructions.)
2. Loosen the captive thumbscrews that fasten the EMC shield to the
chassis.
3. Remove the EMC shield from the chassis.
Replace the EMC shield as follows:
1. Position the EMC shield in front of the chassis.
2. Tighten the captive thumbscrews that fasten the EMC shield to the
chassis.
To replace the front bezel, the EMC shield must be in place. Refer to “Removing
and Replacing the Front Bezel” earlier in this chapter for instructions.
Komentáře k této Příručce