
Starting ATM, ATM MPOA Server, ATM Router Redundancy, and MPLS
117374-C Rev 00
3-35
Adding IP Adjacent Hosts
To add IP adjacencies to LDP, complete the following tasks:
Caution:
You must configure IP adjacent hosts at the MPLS interface level.
The adjacencies must be specific to the MPLS interface for MPLS to function
properly. Do not configure IP adjacent hosts at the global level.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
click on an ATM link module interface
(
ATM1
).
The Select Connection Type window
opens.
2. Click on
MPLS
. The Edit MPLS Connector window opens.
3. Click on
LDP
. The LDP Session Records List window
opens.
4. Click on the session record that you
configured.
(Site Manager supports only one LDP
session record.)
The Protocols menu selection becomes
active.
5. Click on
Protocols
. The Protocols menu opens.
6. Choose
Edit IP
. The IP menu opens.
7. Choose
Adjacent Hosts
. The IP Adjacent Hosts window opens.
8. Click on
Add
. The IP Configuration window opens.
9. Set the following parameters:
• IP Adjacent Host Address
• MAC Address, DLCI, VPI/VCI
• Host Encapsulation
Click on
Help
or see
Configuring IP
Services
for details.
Set the
IP Adjacent Host Address
parameter to the next-hop IP address of
the LSR to which you are connecting.
Set the
MAC Address, DLCI, VPI/VCI
parameter to the VPI/VCI value of the
LDP default VC.
Set the
Host Encapsulation
parameter
to SNAP.
10. Click on
OK
. You return to the IP Adjacent Hosts
window.
(continued)
Komentáře k této Příručce