Avaya Configuring ATM and MPLS Services Uživatelský manuál stáhnout pdf (Strana 300)

100

101

Configuring ATM and MPLS Services

8-46

117374-C Rev 00

Setting the Flush Timeout

The flush timeout specifies the amount of time that the LEC waits to receive a

flush response (after sending a flush request) before it takes recovery action by

switching to the BUS.

By default, the LEC waits 4 seconds for a flush response. However, you can set

the flush timeout to a value from 1 to 4 seconds.

Using the BCC

To change the flush timeout value, navigate to the service record prompt (for

example,

box; atm/11/1; lec-service/newyork

) and enter:

flush-timeout

<value>

value

is the number of seconds (from 1 to 4) that the LEC waits for a flush

response.

For example, the following command changes the flush timeout value to 2

seconds:

lec-service/newyork# flush-timeout 2

lec-service/newyork#

6. Set the

Flush Protocol

parameter. Click

Help

or see the parameter description

on page A-35.

7. Click on

. You return to the ATM Service Records

List window.

8. Click on

Done

. You return to the Edit ATM Connector

window.

9. Click on

Done

. You return to the Select Connection Type

window.

10. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 295 296 297 298 299 300 301 302 303 304 305 ... 528 529

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring ATM and MPLS Services Uživatelský manuál Strana 300

Komentáře k této Příručce

Související produkty a manuály pro Sítě Avaya Configuring ATM and MPLS Services