Avaya Configuring ATM and MPLS Services Uživatelský manuál Strana 53

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 529
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 52
Understanding ATM, MPOA, ATM Router Redundancy, and OAM
117374-C Rev 00
1-23
Entering an ATM Address Network Prefix
The ATM address network prefix specifies the ATM domain of which the service
record is a part. This 13-byte portion of the ATM address can range from
XX000000000000000000000000 to XXFFFFFFFFFFFFFFFFFFFFFFFF.
The XX byte must contain a value of 39, 45, or 47. These values define the
authority and format identifier (AFI). The AFI byte identifies the group
responsible for allocating the prefix and the format the prefix uses. For more
information about the AFI byte, refer to the ATM Forum UNI specification.
Entering an ATM address network prefix is optional. If you do not enter a network
prefix in the specified range, the service record accepts the first prefix value that it
receives from the switch.
Entering an ATM Address User Part
The ATM address user part (suffix) consists of a 6-byte end-station identifier and a
1-byte selector field. This 7-byte portion of the ATM address can range from
00000000000000 to FEFFFFFFFFFFFF.
You can either allow the router to generate this value automatically, or you can
enter the value manually.
ATM Traffic Parameters
The ATM User-Network Interface Specification defines the following traffic
parameters:
Peak cell rate (PCR) -- The upper traffic rate limit for an individual VC
Sustainable cell rate (SCR) -- The upper bound on the conforming average
rate of an individual PVC or control VC
Maximum burst size (MBS) -- The maximum length of a cell stream allowed
on a particular VC
These parameters help to prioritize and control the traffic on each VC. How you
configure your ATM traffic parameters depends on the characteristics of the
individual connections that you want to set up (for example, the desired maximum
cell rate, average cell rate, and burst size).
Zobrazit stránku 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 528 529

Komentáře k této Příručce

Žádné komentáře