Avaya Configuring ATM and MPLS Services Uživatelský manuál Strana 487

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 529
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 486
Monitoring ATM Using the BCC show Command
117374-C Rev 00
B-15
show dsx3 history
The
show dsx3 history
command displays line, Pbit, Cbit, and Plcp statistics for the
DSX3 circuits in the configuration over specific intervals.
The output includes the following information:
Slot/<Module>/Conn The slot, module, and connector number of the DSX3 circuit.
Circuit Name of the circuit associated with this line.
Sec into Interval The number of seconds into the current interval.
# of Intervals The number of complete intervals.
Line Coding The line coding on this circuit. The line coding options are:
•B3ZS
HDB3
Line Type Status The line status of the interface. The possible status values are:
NoAlarm
- no alarm present
RRAI
- receiving yellow remote alarm indication
TRAI -
transmitting yellow remote alarm indication
RAIS
- receiving Alarm Indications Signal (AIS) failure state
TA I S
- transmitting AIS failure state
LOF
- receiving Loss of Frame (LOF) failure state
LOS
- receiving Loss of Signal (LOS) failure state
Loopback
- looping the received signal
TestCode
- receiving a test pattern
LowSignal
- low signal
Zobrazit stránku 486
1 2 ... 482 483 484 485 486 487 488 489 490 491 492 ... 528 529

Komentáře k této Příručce

Žádné komentáře