Avaya Configuring ATM and MPLS Services Uživatelský manuál stáhnout pdf (Strana 512)

Configuring ATM and MPLS Services

C-6

117374-C Rev 00

Adding NHRP to an Existing ATM Interface

To add NHRP to an existing ATM interface, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM interface (

ATM1

) on

which you want to add NHRP.

The Select Connection Type window

opens.

2. Click on

ATM

. The Edit ATM Connector window opens.

3. Click on

Service Attributes

. The ATM Service Records List window

opens.

4. Click on the ATM LANE or LLC/SNAP

service record to which you want to add

NHRP.

5. Click on the Protocols menu in the upper

left hand corner of the window.

6. Choose

Add/Delete

. The Select Protocols window opens.

7. Select

IP

,

RIP

, and

NHRP

.

8. Click on

OK

. The IP Configuration window opens.

9. Set the following parameters:

• IP Address

• Subnet Mask

• Transmit Bcast Address

Click on

Help

or see

Configuring IP

Services

for parameter descriptions.

10. Click on

OK

. The ATM ARP Configuration window

opens.

11. Set the following parameters:

• ATM ARP Mode

• ARP Server ATM Address Network

Prefix

• ARP Server ATM Address User Part

Click on

Help

or see the parameter

descriptions beginning on page A-102.

12. Click on

OK

. The NHRP Network Configuration

window opens.

(continued)

1 2 ... 507 508 509 510 511 512 513 514 515 516 517 ... 528 529

Komentáře k této Příručce

Žádné komentáře