Avaya Configuring ATM and MPLS Services Uživatelský manuál stáhnout pdf (Strana 209)

100

101

Customizing Signaling

117374-C Rev 00

5-61

Modifying SAAL Timers

You can change the default values for SSCOP/SAAL timers. For each timer,

Table 5-4

provides the BCC name, Site Manager name, default value, range, and

description.

Note:

Bay Networks recommends that you leave these timers set to their

default values unless instructed to change them by Bay Networks Customer

Service or your switch provider.

Table 5-4. SSCOP/SAAL Timer Descriptions

BCC Name

Site

Manager

Name

Default

Value Range Description

poll-timer Poll Timer 7 1 to 120 Specifies the SSCOP poll timer value (in tenths of a

second). This value sets the allowable time between

POLL PDU transmissions.

The poll timer ensures that the receiver continues to

return a solicited status (STAT) PDU to the sender on a

regular basis. The timely receipt of STAT PDUs restarts

the poll timer and allows for more efficient transmission

error recovery.

keep-alive-

timer

Keep Alive

Timer

20 1 to 120 Specifies the SSCOP keep alive timer value (in tenths of

a second). This value sets the allowable time between

POLL PDU transmissions if there are no pending

sequence data (SD) PDUs.

The keep alive timer is generally greater than the poll

timer and greater than the length of one round-trip delay.

(continued)

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 528 529

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring ATM and MPLS Services Uživatelský manuál Strana 209

Komentáře k této Příručce

Související produkty a manuály pro Sítě Avaya Configuring ATM and MPLS Services