Avaya Configuring ATM and MPLS Services Uživatelský manuál stáhnout pdf (Strana 135)

100

101

Customizing an ATM Interface

117374-C Rev 00

4-9

Assigning the Framing Mode

You can assign various framing modes to an ATM line, depending on the interface

type your device uses. Refer to Table 4-1

to match the appropriate framing modes

to the correct interface type. You can assign the following transceiver framing

modes to the ATM line.

By default, the ATM line uses SONET framing for OC-3 interfaces, Cbit framing

for DS-3 interfaces, and G.832 framing for E-3 interfaces.

Using the BCC

To change the framing mode, navigate to the atm prompt (for example,

box; atm/11/1

) and enter:

framing-mode

<mode>

mode

is one of the following framing modes:

• sdh • g832

• sonet • cbitnofallback

• cbit • clearchannel

•g751

For example, the following command sets the framing mode to SDH:

atm/11/1#

framing-mode sdh

atm/11/1#

Table 4-1. Supported Framing Modes for ATM Interfaces

Framing Mode

Interface

Type SDH SONET DS3_CBIT E3_G751 E3_G832 CBITnofallback ClearChannel

OC-3

DS-3

999

E-3

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 528 529

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring ATM and MPLS Services Uživatelský manuál Strana 135

Komentáře k této Příručce

Související produkty a manuály pro Sítě Avaya Configuring ATM and MPLS Services