Avaya BayRS Version 15.5.0.0 Uživatelský manuál stáhnout pdf (Strana 121)

Upgrading Routers to BayRS Version 15.x

314470-15.5 Rev 00 17-7

slot_ID

is the slot location of the diagnostic PROM that you want to update.

For AN, ANH, ARN, and Passport 2430 routers, the

slot_ID is always 1.

For example, enter the following command:

prom -w 2:frediag.exe 3

This command erases the diagnostic PROM image on slot 3 and copies the

contents of the frediag.exe file on volume 2 to the PROM on slot 3.

6. Upgrade PROMs on multiple slots on your router.

If you need to update PROM images on multiple slots, use a dash to indicate a

range of slots (2-5), or use commas or spaces to separate multiple slot

locations (2, 3, 5 or 2 3 5).

For example, enter the following command:

prom -w 2:frediag.exe 2, 3, 5

This command erases the diagnostic PROM images on slots 2, 3, and 5 and

copies the contents of the frediag.exe file on volume 2 to the PROMs on slots

2, 3, and 5.

7. Verify the PROM upgrade by entering the following command:

prom -v <volume_no.>:<PROM_source_file> <slot_ID>

For example, for a boot PROM, enter:

prom -v 1:arnboot.exe 1

For a diagnostic PROM, enter:

prom -v 1:arndiag.exe 1

The system verifies that the PROM image on a designated flash volume (that

is, the image file used as a source for upgrading the PROM) matches the

image actually stored in the boot or diagnostic PROM on the designated slot.

The console displays one of the following messages after the verification

terminates:

prom: slot <slot ID> completed successfully

prom: PROM data does not match file data on slot <slot ID>

If the operation succeeds, the new images stored in the boot and diagnostic

PROMs run when you reboot the router.

If the operation fails, the console displays a message describing the cause of

the failure.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 197 198

Žádné komentáře

Avaya BayRS Version 15.5.0.0 Uživatelský manuál Strana 121