
BayRS Version 15.5.0.0 Document Change Notice
A-10 314470-15.5 Rev 00
Automated Security Association (IKE) Parameters
You use the following parameters to define a cryptographic key for creating IKE
SAs between routers.
Parameter: Pre-shared Key (ascii)
Path: Configuration Manager > Protocols > IP > IKE
Configuration Manager > Edit Circuit > Protocols > Edit IP > IKE
Default: None
Options: Up to 24 ASCII characters
Function: Used as a cryptographic key for creating IKE SAs between routers. IKE is then
used to create automated SAs for data packets.
Instructions: Enter an ASCII string, up to 24 characters. Configure the same preshared key on
the destination router.
MIB Object ID: None
Parameter: Pre-shared Key (hex)
Path: Configuration Manager > Protocols > IP > IKE
Configuration Manager > Edit Circuit > Protocols > Edit IP > IKE
Default: None
Options: Up to 24 bytes
Function: Used as a cryptographic key for creating IKE SAs between routers. IKE is then
used to create automated SAs for data packets.
Instructions: Enter a hexadecimal number, up to 24 bytes. (Enter the prefix
0x before the
digits.) Configure the same preshared key on the destination router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.27.1.1.9
Komentáře k této Příručce