
BayRS Version 15.5.0.0 Document Change Notice
A-8 314470-15.5 Rev 00
Parameter: Setup Alarm Threshold (seconds)
Path: Configuration Manager > ATM1 > Physical Layer Configuration > DS3 or E3
Default: 2
Options: 2 to 10
Function: Sets the time interval (in seconds) during which the device driver tolerates a
performance defect or anomaly. If the performance defect or anomaly is still
present when time interval expires, the device driver records a performance
failure and logs an event message.
Instructions: Set the timer value in seconds.
MIB Object ID: 1.3.6.1.4.1.18.3.4.26.10.1.17
Parameter: Clear Alarm Threshold (seconds)
Path: Configuration Manager > ATM1 > Physical Layer Configuration > DS3 or E3
Default: 2
Options: 2 to 10
Function: Specifies the clear time (in seconds) for performance failure conditions. If the
defect or anomaly clears within this interval, the device driver records a
performance cleared condition and logs an event message.
Instructions: Set the timer value in seconds.
MIB Object ID: 1.3.6.1.4.1.18.3.4.26.10.1.18
Komentáře k této Příručce