Avaya BayRS Version 15.5.0.0 Uživatelský manuál Strana 26

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 198
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 25
BayRS Version 15.5.0.0 Document Change Notice
3-2 314470-15.5 Rev 00
pci_slot is the number of the PCI slot containing the ATM T3/E3 PMC module.
The PCI slot number for the ATM T3/E3 PMC module is always 1.
module_number is always 2 for the ATM interface.
connector_number is the number of a connector on the ATM T3/E3 PMC module.
mode t3 or mode e3 specifies whether the ATM interface is a T3 or E3 interface.
For example, the following command adds an ATM T3 interface to the Passport
5430 configuration on slot 1, PCI slot 1, module 2, connector 1:
box# atm slot 1 pci-slot 1 module 2 connector 1 mode t3
atm/1/1/2/1#
To configure T3/E3 parameters, use the following procedures.
Specifying the Cable Length
To specify the cable length, navigate to the ATM interface prompt (for example,
box; atm/1/1/2/1; atm-e3) and enter:
cable-length <length>
length is either short (default) or long. Specify short for a cable less than 225 feet
long; specify long for a cable length of 225 feet or more.
For example, the following command changes the cable length to long:
atm-e3/1/1/2/1# cable-length long
atm-e3/1/1/2/1#
Specifying the Clear Alarm Threshold
To specify the duration of time (in seconds) that elapses following the clearing of
a performance failure (before the condition is registered and logged), navigate to
the ATM interface prompt (for example,
box; atm/1/1/2/1; atm-e3) and enter:
clear-alarm-threshold <integer>
integer
is a value from 2 through 10 seconds, inclusive.
Zobrazit stránku 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 197 198

Komentáře k této Příručce

Žádné komentáře