
Configuring Traffic Filters and Protocol Prioritization
314470-15.5 Rev 00 13-11
You can specify match criteria for filters as described in the following sections:
Specifying Source and Destination Networks As Match Criteria
To filter on source and destination networks, go to the match-ip-ip prompt (for
example, (for example,
box; serial/3/1; protocol-priority; ip-outbound-filter
<filter_name>); match-ip-ip) and do the following for each source and destination
network that you want to filter on:
1. Enter the following command:
{source | destination}-network <address_range>
<address_range>
specifies a range of IP addresses for source and destination
networks.
The source network or destination network prompt appears.
2. Go back to the match-ip-ip prompt:
back
Example
match-ip-ip/ip-outbound-filter/drop_telnet_s31/S31# source-network
10.1.0.0-10.1.255.255
source-network/ip-outbound-filter/drop_telnet_s31/S31/
10.1.0.0-10.1.255.255#
back
match-ip-ip/ip-outbound-filter/drop_telnet_s31/S31#
destination-network 10.2.0.0-10.2.255.255
destination-network/ip-outbound-filter/drop_telnet_s31/S31/
10.2.0.0-10.2.255.255#
back
match-ip-ip/ip-outbound-filter/drop_telnet_s31/S31#
Topic Page
Source and destination network 13-11
Source and destination TCP and UDP port 13-12
Protocol type 13-15
Type of service 13-16
Established TCP ports 13-16
User-defined criteria 13-24
Komentáře k této Příručce