
BayRS Version 15.5.0.0 Document Change Notice
18-8 314470-15.5 Rev 00
To enable or disable multilink multiclass on dial-up lines using Site Manager,
perform the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose PPP.
3. Choose Interfaces. The PPP Interface List window opens.
4. Click on the interface on which you want to
enable/disable multilink Multiclass.
5. Click on Lines. The PPP Line Lists window opens for the
selected interface.
6. Click on the line on which you want to
enable/disable multilink multiclass.
7. Set the Multilink MultiClass Enable
parameter. Click on Help or see the
parameter descriptions beginning on A-26
.
8. Click on Apply.
9. Repeat steps 6 through 8 for each line on
which you want to enable/disable multilink
multiclass.
10. Click on Done. You return to the PPP Interface List
window.
11. Click on Done again. You return to the Configuration Manager
window.
Komentáře k této Příručce