Avaya BayRS Version 15.5.0.0 Uživatelský manuál Strana 166

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 198
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 165
BayRS Version 15.5.0.0 Document Change Notice
A-4 314470-15.5 Rev 00
Parameter: Interface MTU
Path: Configuration Manager > ATM1 > ATM Line Attributes
Default: 4608
Options: 0 to 9188
Function: Specifies the largest packet size (in octets) that the router can transmit on this
interface.
Instructions: Enter a value that is appropriate for the network.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.3.2.1.9
Parameter: Data Path Enable
Path: Configuration Manager > ATM1 > ATM Line Attributes
Default: Enable
Options: Enable
| Disable
Function: Specifies whether the router disables the interface between the driver and the
higher-level software (the data path interface) when you disconnect the cable
from the ATM module.
If you select Enable, then when you disconnect the cable from the ATM
module, the router disables the data path interface after the time you specify
with the Data Path Notify Timeout parameter.
If you select Disable, the router does not disable the data path interface when
you disconnect the cable from the ATM module.
Instructions: Select Enable or Disable. If you select Enable, be sure to enter an appropriate
value for the Data Path Notify Timeout parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.3.2.1.11
Parameter: Data Path Notify Timeout
Path: Configuration Manager > ATM1 > ATM Line Attributes
Default: 1
Options: 0 to 3600
Function: Specifies the time (in seconds) that the router waits before disabling the data
path interface when you disconnect the cable from the ATM module, providing
that you set the Data Path Enable parameter to Enable.
Instructions: Accept the default or enter an appropriate value.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.3.2.1.12
Zobrazit stránku 165
1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 197 198

Komentáře k této Příručce

Žádné komentáře