Avaya BayRS Version 15.5.0.0 Uživatelský manuál Strana 171

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 198
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 170
Site Manager Parameters
314470-15.5 Rev 00 A-9
Parameter: Loopback Configuration
Path: Configuration Manager > ATM1 > Physical Layer Configuration > DS3 or E3
Default: No Loopback
Options: No Loopback
| Payload Loopback | Line Loopback
Function: Forces the interface into loopback mode. The far-end or intermediate equipment
then performs diagnostics on the network between that equipment and the T3/
E3 interface. After testing, set this parameter to No Loopback to return the
interface to a normal operating mode.
No Loopback — Returns the interface to non-loopback operation.
Payload Loopback — The received signal at this interface is looped through
the device. Typically the received signal is looped back for re-transmission
after it has passed through the device’s framing function.
Line Loopback — The received signal at this interface does not go through
the framing device (minimum penetration) but is looped back out.
Instructions: Select the loopback configuration option.
MIB Object ID: 1.3.6.1.4.1.18.3.4.26.10.1.9
Parameter: Primary Clock
Path: Configuration Manager > ATM1 > Physical Layer Configuration > DS3 or E3
Default: Loop
Options: Internal
| Loop
Function: Specifies the clock signal source.
Instructions: Select Internal if you want the router to generate the clock signal source.
Otherwise, accept the default, Loop, if you want the clock signal source to be
external to the router.
MIB Object ID: 1.3.6.1.4.1.18.3.4.26.10.1.11
Zobrazit stránku 170
1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 197 198

Komentáře k této Příručce

Žádné komentáře